Please update pfsense dyn...
Please update pfsense dynamic dns resource
- Casa
- Pannello di controllo
- Forum della Comunità
- Services
- Dynamic DNS Service
- Please update pfsense dynamic dns resource
- Forum della Comunità
- Please update pfsense dynamic dns resource
Argomento: Please update pfsense dynamic dns resource
Hi, just set up DDNS using pfSense 2.3 Dynamic DNS client service. The response check for the successful result should be changed from "good|nochg" to "good|nochg|good %IP%" otherwise pfSense does not update the cached ip address in its own interface. Dynu DDNS is still updated, but the pfSense interface shows an error.
Rispondi con citazione | Segnalare
Thank you for sharing. I was able to get it work with the response you suggested "good|nochg|good %IP%" .
Rispondi con citazione | Segnalare
janetmeza wrote:Thank you for sharing. I was able to get it work with the response you suggested "good|nochg|good %IP%" .
Rispondi con citazione | Segnalare
garym wrote:I'm glad that it worked for you in 2017 but in 2020 on pfSense 2.4.4 the problem still exists for me. Used the guide from dynu.com for filling out the pfsense form, but alas the cached ip never changes in it's own interface,thereby showing an error. Dynu DDNS is still updated though.janetmeza wrote:Thank you for sharing. I was able to get it work with the response you suggested "good|nochg|good %IP%" .
Rispondi con citazione | Segnalare
Actually, I see they have changed the guide, so then the question is:Which update string are you using?I have 4 domains on the one dynamic IP, so I use the:Update all domains in your accountSSL Format: https://api.dynu.com/nic/update?username=USERNAME&password=PASSWORDWhere PASSWORD is the MD5/SHA256 hashIf in doubt, post your anonymised logs.
gerrydeakin wrote:Hi, I'm running 2.4.4-RELEASE-p3 (amd64), and it's still working for me with the altered Result Match as per my original post. Its not clear whether you followed the guide AND changed the Result Match or only followed DynU's original guide which I'm guessing hasn't been updated.Maybe post your anonymized logs to show what's going wrong (with Verbose logging ticked under the DynamicDNS config screen)?garym wrote:I'm glad that it worked for you in 2017 but in 2020 on pfSense 2.4.4 the problem still exists for me. Used the guide from dynu.com for filling out the pfsense form, but alas the cached ip never changes in it's own interface,thereby showing an error. Dynu DDNS is still updated though.janetmeza wrote:Thank you for sharing. I was able to get it work with the response you suggested "good|nochg|good %IP%" .
Rispondi con citazione | Segnalare
I have similar problem. I cannot Update IP.I am using syntax: https://api.dynu.com/nic/update?username=USERNAME&password=PASSWORDIn pfsense, The CACHED IP color on status page is GREEN!! meaning the IP is up to date with Dynamic DNS provider. BUTWhen I log onto dynu, under "Dynamic DNS Service" I still see old IP address listed in IPv4 column.What's happening?
gerrydeakin wrote:Actually, I see they have changed the guide, so then the question is:Which update string are you using?I have 4 domains on the one dynamic IP, so I use the:Update all domains in your accountSSL Format: https://api.dynu.com/nic/update?username=USERNAME&password=PASSWORDWhere PASSWORD is the MD5/SHA256 hashIf in doubt, post your anonymised logs.gerrydeakin wrote:Hi, I'm running 2.4.4-RELEASE-p3 (amd64), and it's still working for me with the altered Result Match as per my original post. Its not clear whether you followed the guide AND changed the Result Match or only followed DynU's original guide which I'm guessing hasn't been updated.Maybe post your anonymized logs to show what's going wrong (with Verbose logging ticked under the DynamicDNS config screen)?garym wrote:I'm glad that it worked for you in 2017 but in 2020 on pfSense 2.4.4 the problem still exists for me. Used the guide from dynu.com for filling out the pfsense form, but alas the cached ip never changes in it's own interface,thereby showing an error. Dynu DDNS is still updated though.janetmeza wrote:Thank you for sharing. I was able to get it work with the response you suggested "good|nochg|good %IP%" .
Rispondi con citazione | Segnalare
garym wrote:I'm glad that it worked for you in 2017 but in 2020 on pfSense 2.4.4 the problem still exists for me. Used the guide from dynu.com for filling out the pfsense form, but alas the cached ip never changes in it's own interface,thereby showing an error. Dynu DDNS is still updated though.janetmeza wrote:Thank you for sharing. I was able to get it work with the response you suggested "good|nochg|good %IP%" .
Rispondi con citazione | Segnalare
For what it's worth, I needed to update a specific host rather than the whole domain. Contrary to the instructions, for this I used the URL:Sending request to: https://api.dynu.com/nic/update?hostname=mydomain.com&password=5b3c5b7d_themd5password_27004&alias=myhost&myip=%IP%The clue here is to set the alias to be your the name of your A record, and myip=%IP% will be substituted by the address detected by pfsense.Hope this helps someone !Cheers,Keith
Rispondi con citazione | Segnalare
Autore | Argomento: Please update pfsense dynamic dns resource |
---|---|
Gerry Deakin Iscritto: 07/07/2017 |
Please update pfsense dynamic dns resource sabato 8 luglio 2017 10:19
Hi, just set up DDNS using pfSense 2.3 Dynamic DNS client service. The response check for the successful result should be changed from "good|nochg" to "good|nochg|good %IP%" otherwise pfSense does not update the cached ip address in its own interface. Dynu DDNS is still updated, but the pfSense interface shows an error.
|
janetmeza Iscritto: 23/06/2017 |
Please update pfsense dynamic dns resource mercoledì 12 luglio 2017 13:18
Thank you for sharing. I was able to get it work with the response you suggested "good|nochg|good %IP%" .
|
garym Iscritto: 04/07/2015 |
Please update pfsense dynamic dns resource venerdì 31 gennaio 2020 13:40
|
gerrydeakin Iscritto: 07/07/2017 |
Please update pfsense dynamic dns resource venerdì 31 gennaio 2020 16:14
|
gerrydeakin Iscritto: 07/07/2017 |
Please update pfsense dynamic dns resource venerdì 31 gennaio 2020 16:22
Actually, I see they have changed the guide, so then the question is:Which update string are you using?I have 4 domains on the one dynamic IP, so I use the:Update all domains in your accountSSL Format: https://api.dynu.com/nic/update?username=USERNAME&password=PASSWORDWhere PASSWORD is the MD5/SHA256 hashIf in doubt, post your anonymised logs.
|
domain03 Iscritto: 04/12/2018 |
Please update pfsense dynamic dns resource mercoledì 26 febbraio 2020 19:18
I have similar problem. I cannot Update IP.I am using syntax: https://api.dynu.com/nic/update?username=USERNAME&password=PASSWORDIn pfsense, The CACHED IP color on status page is GREEN!! meaning the IP is up to date with Dynamic DNS provider. BUTWhen I log onto dynu, under "Dynamic DNS Service" I still see old IP address listed in IPv4 column.What's happening?
|
garym Iscritto: 04/07/2015 |
Please update pfsense dynamic dns resource martedì 17 marzo 2020 01:18
|
KeithBailey Iscritto: 29/05/2020 |
Please update pfsense dynamic dns resource venerdì 29 maggio 2020 10:04
For what it's worth, I needed to update a specific host rather than the whole domain. Contrary to the instructions, for this I used the URL:Sending request to: https://api.dynu.com/nic/update?hostname=mydomain.com&password=5b3c5b7d_themd5password_27004&alias=myhost&myip=%IP%The clue here is to set the alias to be your the name of your A record, and myip=%IP% will be substituted by the address detected by pfsense.Hope this helps someone !Cheers,Keith
|
Al momento è venerdì 4 ottobre 2024 17:36 US Mountain Standard Time
venerdì 4 ottobre 2024 17:36